Akai PT4250A

English - 24
INSTALLATION
Connecting a DVD Player or DTV Set-Top Box
(480i, 480p, 720p, 1080i)
The rear panel jacks on your TV make it easy to connect a DVD player or DTV Set-Top Box
to your TV.
Connecting to Y, PB, PR
Connecting to Regular Audio and Video Jacks
1
Connect a set of audio cables between the
“COMPONENT IN 1 (L, R)” (or “COMPONENT IN 2
(L, R)”) jacks on the TV and the AUDIO OUT jacks
on the DVD player (or DTV Set-Top Box).
2
Connect a set of video cables between the
“COMPONENT IN 1 (Y, PB, PR)” (or “COMPONENT
IN 2 (Y, PB, PR)”) jacks on the TV and the VIDEO
OUT (Y, PB, PR) jacks on the DVD player (or DTV
Set-Top Box).
For an explanation of Component video, see your
DVD player’s (or DTV Set-Top Box) owner’s
instruction.
1
Connect a set of audio cables between the “AV IN 1 (L, R)”
(or “AV IN 2 (L, R)”) jacks on the TV and the AUDIO OUT
jacks on the DVD player (or DTV Set-Top Box).
2
Connect a video cable between the “AV IN 1 (VIDEO)” (or
“AV IN 2 (VIDEO)”) jack on the TV and the VIDEO OUT jack
on the DVD player (or DTV Set-Top Box).
• Also, you can connect to “AV 3” on the side panel of TV.
TV Rear Panel
TV Rear Panel
Video Cable
Audio Cable
DVD Player/
DTV Set-Top Box
Video Cable
Audio Cable
DVD Player/
DTV Set-Top Box
1
2
1
2
BP68-00516A-01 (P62A_Akai_Eng) 7/5/05 1:08 PM Page 24