Akai PT4250A

English - 32
Adjusting Convergence Manually
If the color appears spread out or “smeared” on the screen, the convergence probably needs
alignment. Be sure to use the remote control for the convergence adjustments.
First steps:
continued...
OPERATION
1
Press the MENU button.
Press the ▲ or ▼ button
to select “Picture”, then
press the ENTER button.
2
Press the ▲ or ▼ button
to select “Manual
Convergence”, then
press the ENTER button.
Press the ▲ or ▼ button
to select “Red” or “Blue”.
Red √
Blue √
Reset
Manual Convergence
T V
Mode : Dynamic √
Size √
Self Focus √
Manual Convergence √
Mode : Dynamic √
Size √
Self Focus √
Manual Convergence √
T V
T V
Picture
Picture
BP68-00516A-01 (P62A_Akai_Eng) 7/5/05 1:08 PM Page 32