English - 44
OPERATION
Picture Control
You can select the type of picture which best corresponds to your viewing requirements.
Using Automatic Picture Settings
Your TV has automatic picture settings (“Dynamic”, “Standard”, and “Movie”) that are preset
at the factory. You can activate either Dynamic, Standard, or Movie by making a selection
from the menu. Or, you can select “Custom” which automatically recalls your personalized
picture settings.
• Choose “Dynamic” for viewing the TV during the day or when there is bright
light in the room.
• Choose “Standard” for the standard factory settings.
•Choose “Movie” when viewing the movie.
• Choose “Custom” if you want to adjust the settings according to personal
preference.
2
Press the ENTER button to
select “Mode”.
Press the ENTER button
again.
Press the … or † button
to select a particular item,
then press the ENTER
button.
Press the EXIT button to
exit.
1
Press the MENU button.
Press the ▲ or ▼ button
to select “Picture”, then
press the ENTER button.
Mode : Dynamic
Contrast 100
Brightness 45
Sharpness 75
Color 50
Tint G 50 R50
Color Tone : Cool 1
Reset
T V
Mode
Mode : Dynamic √
Size : 16:9 √
Self Focus √
Manual Convergence √
T V Picture
Dynamic
Standard
Movie
Custom
Alternate method:
Simply press the P.MODE
button on the remote
control repeatedly to select
one of the standard picture
settings.
Dynamic
BP68-00516A-01 (P62A_Akai_Eng) 7/5/05 1:09 PM Page 44
To Next Page
Loading...