SP2/SP8/SP8-X20 Manual
Updated until firmware 413 - 12 -
7) Problems updating firmware that is very old to the latest release.
You may experience a problem when trying to update your sensorProbe2 or sensorProbe8 to
the latest firmware if the firmware on your base unit has not been updated for a very long
period of time.
If you try to update your unit and receive this error below in the IPSet utility, then you will
need to update your unit in one or two steps, depending on how old the firmware version is
you are running on the unit.
Please download either of these older versions of firmware depending on if you have a
sensorProbe2 or sensorProbe8 unit, then update the unit with each and then to the latest
version that is on our web site.
Download link here to: SP2_371.rar
Download link here to: SP2_398.rar
Download link here to: SP8_371.rar
Download link here to: SP8_398.rar
To Next Page
Loading...
