EasyManuals Logo

Åkerströms JUPITER 100J User Manual

Åkerströms JUPITER 100J
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Operating Manual JUPITER 100J & 150J 10 (28)
JUPITER 800/900 100J & 150J Document-ID: 948681-000
Version: A2 Author: SH
EN
BATTERY
The transmitter is equipped with a status indicator (green and yellow) for bat-
tery status. The LED ash slowly green when the battery voltage is normal,
but starts to ash fast yellow when it gets low. When the indicator lamp has
started blinking yellow the transmitter can be operated, but the battery has to
be changed before the voltage is so low that the transmitter switches off auto-
matically. This is indicated by the status indicator showing xed yellow light.
Disposal of a NiMH battery poses a smaller threat to the
environment when compared to other battery types. However, all
used NiMH batteries should be immediately sent to a qualied
battery collection centre for recycling.
• Remove the battery from the charger when the power supply is turned off
• A well maintained battery is necessary for faultless operation.
!
The battery must not be charged if the temperature is lower than
+10ºC or higher than +40ºC.
!
Only use chargers approved by the supplier.
!
Warning! If an incorrect battery type is used in the unit,
the battery may explode.
CHARGING INSTRUCTIONS
Please read the documentation supplied with the charger for charging in-
structions.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Åkerströms JUPITER 100J and is the answer not in the manual?

Åkerströms JUPITER 100J Specifications

General IconGeneral
BrandÅkerströms
ModelJUPITER 100J
CategoryRemote Control
LanguageEnglish

Related product manuals