Åkerströms JUPITER 100J - Maintenance Procedures; Daily Maintenance Checks; Weekly Maintenance Tasks

Operating Manual JUPITER 100J & 150J 4 (28)
JUPITER 800/900 100J & 150J Document-ID: 948681-000
Version: A2 Author: SH
EN
OPERATING MANUAL JUPITER 100J & 150J
!
The equipment has to be controlled by a qualied operator
MAINTENANCE
To maintain availability and operational safety, a regular maintenance is
necessary on the system.
Daily Maintenance
Before each use of the transmitter, check the following items for faults or
damages:
• Visual inspection of rubber sealing around levers
• Broken/faulty switches or controls
• Visual inspection of transmitter housing (cracks, dents)
• Visual inspection of carrying device
• Visual inspection of battery (cracks, dents)
• Test that the battery lock is functioning normally
• Test of safety stop button (it shall be intact and easy to move)
Check function of:
• Checkfunctionoftransmitterstatusindicator,shortashatpowerup
If there is any damage or fault contact an authorised service technician.
Weekly Maintenance
• Clean the battery contacts and the contacts on the transmitter and charger
• Clean the transmitters control panel and check that the print is still readable
!
For cleaning use a dry cleaning cloth, if necessary use a wet cleaning
cloth and a soap solution. Never use a alcohol-based product for cleaning,
it can seriously damaged the plastic.