12 C3000
Powering / Cleaning
The C3000 provides low self-noise (just 14 dB(A)!) yet high headroom. The
microphone requires a phantom power source providing 9 to 52 V as per
IEC 61938.
ATTENTION
Risk of damage
Do not connect the microphone to any power supply other than a phantom
power source (input with phantom power or external IEC standard phantom
power supply) with a floating connector, using a balanced cable with studio
grade connectors to IEC 268-12 only. This is the only way to ensure safe and
reliable operation.
Use a soft cloth moistened with water to clean the surface of the
microphone body.
3 Powering
4 Cleaning
Microphone
20120403_BDA C3000 (5018375)_PRINT.pdf Release 1.0
To Next Page
Loading...
