Brightness: press on the brightness setting and move the yellow dots to
adjust the screen brightness. The default brightness is “5”.
Screen Saver: tick the square box to enable the screen saver function.
Sleep: set the timing for the device screen to be turned off. You can
select the timing among nine options: 15 seconds,30 seconds, 1
minute, 2 minutes,5 minutes, 10 minutes, 30 minutes,1 hour. For
example, if you set it as 1 minute then the screen will be turned off if
there is no operation on the device for 1 minute. However, if you turn on
the function, then the device screen will not be turned off until screen
saver display reaches its configured time duration.
Screen Locker: tick the screen locker if you want to lock the screen
after the screen is turned off (turn to dark). You are required to enter
the system code to unlock the screen or you can unlock the screen by
facial recognition.
7.2. Screen Display Setting on the Web Interface
C313 series indoor monitor allows you to enjoy a variety of screen displays to enrich
your visual and operational experience through the customized setting to your
preference.
7.3. Screensaver Configuration
You can upload screen saver pictures to the device for a public purpose or for a
greater visual experience. Upload screen saver on device web interface Phone >
Album > Album.
Parameter Set-up:
Photo: Choose a photo to configure.
Upload: Choose a photo from the PC and upload this photo to the
monitor.
To Next Page
Loading...
Need help?
General
