Akuvox C313 Series Administrator's Guide

Touch Sound: To enable sound when you press screen.
8.1.2. Configure Volume on the Web Interface
You can configure the tones and customize your doorbell sound by uploading the
audio file to your preference on device web interface Phone > Ringtones.
Parameter Set-up:
Upload: to choose the suitable sound file from the local folder.
Ringtones: to set ring tone for incoming calls.
Door Unit Ring Tones: To set ring tone when receiving calls from
Akuvox door units.
9. Phone Book Configuration
9.1. Phone Book Configuration on the Device
You can configure the contacts list in terms of adding and modifying contact groups
or contacts on the device More > Contacts directly.
9.1.1. Add Contacts
Note:
Doorbell sound files to be uploaded must be .WAV or MP3 format
with 250k maximum.

3

Akuvox C313 Series Specifications

General

Audio	Built-in Microphone and Speaker
Installation	Wall-mounted
Ethernet	10/100Mbps
Relay Output	1
PoE	IEEE 802.3af
Power Supply	DC 12V or PoE