ticking the check box and then enter the time and date you want and
press the Save tab to save the setting.
Set Date: Enter the date when it is in manual mode.
Set Time: Enter the time when it is in manual mode.
NTP server1&2: enter the NTP server you obtained in the NTP server
field.
Time Zone: select the specific time zone depending on where the device
is used. The default time zone is GMT+0.00.
Date Format: select the date format as you like among the three format
options. The six formal options are Y-M-D, Y/M/D, D-M-Y, D/M/Y, M-
D-Y, M/D/Y.
Time Format: select 12 hour or 24-hour time format as you like.
6.2.2. Time Setting on the Device Web Interface
6.2.2.1. Time Setting on the Device Web Interface
Time setting on the web Phone > Time interface also allows you to set up the NTP
server address that you obtained to automatically synchronize your time and date.
And when your time zone is selected, the device will automatically notify the NTP
server of its time zone so that the NTP server can synchronize the time zone setting
in your device.
Note:
When the NTP toggle switch is toggled off then parameters related
to NTP server will become non-editable. And when the switch is
toggled on, then time and date will be denied editing.
To Next Page
Loading...
Need help?
General
