Akuvox E16 - Application Network Topology; Configuration

Applicaon Network Topology
Network Video Recorder
(third party)
SIP Video Phone
LAN
PoE PoE
PoE PoE
PC(third party)
PoE
PoE
Indoor Monitor
E16 E16 A05 A05
7
Configuraon
1.IP address Checking: Long press any where on the initial screen for approximately five
minutes to go to project PIN screen where you enter the default PIN “admin” and press
Confirm tab to go to Setting screen where you press Info icon to check for the device IP
address. ( for E16 series door phone only)
2.Account Registration:On the web interface, go to the path Account -> Basic page to
register and fill in the account information. (please refer to user manual for more
information)
3.DTMF code configuration: On the web interface, go the path: Access Control->relay to set
up the DTMF code in the corresponding area.
E16/A05