AKYAPAK ASM - Appropriate Usage and Risks

ASM
USER’S MANUEL
PAGE: 10
03.04-B1
6.5.The machine appropriate usage.
All the
bending operations on the machine must be controled on the front of the machine and
only from the autoritative personal.
The material taken upon the machine in the first operation must be helping from the other
operators,and after this operation the operator must bend the material alone.
For this reason the operator must to read and understand the user manuel very well.
For all the bending operations,the operator must be take safety dispositions,and control step by
step completely all the operations.
Surround the machine,at the bending operation,the max parts of the material,must be take at the
reliable place,and the other personel must not enter there.
The right using of the machine is given below.
E
M
E
R
G
S
T
O
P
6.6. RISKS ARISING FROM THE A
CCESSORIES IN THE MACHINE
When the accessories are assembling in the machıne or taken out, the machine must be
closed (Don’t work) . The emergency switch or hand wheel must be using very easy
from the operator.
! ATTENTION LIFE SECURITY
6.7. EMISSIONS (VOICE FLOW )
The machine working voice flow must be under 70db .