PLEASE ENSURE YOU READ THESE INSTRUCTIONS CARE-

FULLY, BEFORE COMMENCING TO OPERATE THIS PRODUCT.

GENERAL:

1) These notes are guidelines for use of the new handle only. They should

be read in conjunction with the “Assembly and Operating Instructions”

leaet, that should have been supplied with your stabiliser. Please refer to

this leaet for full guidance on maintenance/operation and coupling

procedures for AKS 2004 or AKS 3004. If you do not have a copy, please

request the following from our Service Department:

a) Operating Instructions for AKS 2004 - Part No. 1385399

b) Operating Instructions for AKS 3004 - Part No. 1387429

2) When not in use (during travelling or storage), the handle MUST be

removed from the stabiliser and stored within your vehicle. Providing the

stabiliser has been coupled correctly, the removal of the handle from the

stabiliser arms will not interfere with the normal operation of the stabiliser.

3) Suitable for AKS 2004/3004 Stabilisers only.

ASSEMBLY INSTRUCTIONS FOR

REPLACEMENT AKS 2004/3004 STABILISER HANDLE

PLEASE ENSURE YOU READ THESE INSTRUCTIONS CARE

AL-KO AKS 2004 - Original Instructions For Use Manual

Other manuals for AL-KO AKS 2004