AL-KO AMS2 User Manual (English)

Other manuals for AL-KO AMS2

Questions and Answers:

T
Thomas FlynnAug 21, 2025
Why initial start-up cannot be performed on AL-KO AMS2 Automobile Accessories?
- A
  Albert AguilarAug 21, 2025
  If you're unable to perform the initial start-up of your AL-KO automobile accessories, here are some possible reasons: * The supply battery for the drives may be flat, defective, or not properly connected. Check the battery, charge or replace it if necessary, and ensure it's correctly connected. * The fuse may be removed or defective. Inspect the fuse and replace it if needed. * The remote control might be defective. Check the battery and the remote control itself, replacing it if necessary. * If none of these steps resolve the issue, the system may be defective.
C
Casey BrayAug 23, 2025
What to do if AL-KO Automobile Accessories system does not establish a radio link?
- L
  Leslie ConradAug 23, 2025
  If your AL-KO automobile accessories system fails to establish a radio link, and the operation LED on the remote control doesn't show a continuous green light after attempting to position, consider the following: * Ensure that the initial start-up procedure has been completed. If not, repeat the initial start-up. * The release line may be defective. Replace the release line. As a temporary workaround, you can use the release button on the F-C-A to release the system.
C
Cristina AllenAug 26, 2025
How to fix AL-KO Automobile Accessories remote control if it does not perform an LED test?
- J
  janicetorresAug 26, 2025
  If your AL-KO automobile accessories remote control doesn't perform an LED test when switched on, it could be due to the following reasons: * The batteries may be flat. Replace the batteries in the remote control. * The remote control itself may be defective. Replace the remote control and repeat the teach-in process.
V
vrobinsonAug 27, 2025
How to check flat supply battery for the drives of AL-KO Automobile Accessories?
- C
  Cheryl SantosAug 28, 2025
  To check a flat supply battery for the drives of your AL-KO Automobile Accessories, check the battery display on the remote control, inspect the battery itself, and charge it if necessary.
D
Daniel LaneAug 29, 2025
What to do if AL-KO AMS2 system establishes a radio link, but the drives cannot be moved?
- E
  Eric LawsonAug 30, 2025
  If your AL-KO automobile accessories system establishes a radio link, but the drives are unable to move to the wheels, consider the following: * Check the plug connections of the supply cable, such as the 3-pin plug, to ensure they are properly connected. Reconnect any disconnected plugs. If the plug connections are defective, contact an AL-KO service centre. * Check the LED on the remote control. If the operation LED lights up red, contact an AL-KO service centre, as this may indicate a system defect.
D
diazmichaelSep 1, 2025
What to do if AL-KO AMS2 movement is unexpectedly interrupted?
- B
  Bethany ShepardSep 1, 2025
  If the movement of your AL-KO automobile accessories is unexpectedly interrupted during positioning, manoeuvring, or retracting, it may be due to a poor radio link or interruption in connection. Try reducing the distance from the drives, while maintaining a minimum distance of 0.5 meters.
T
twhitneySep 3, 2025
What to do if AL-KO AMS2 manoeuvring does not work?
- B
  Bryan Bass DDSSep 3, 2025
  If the manoeuvring function of your AL-KO automobile accessories is not working, even though the operation LED is continuously green, the drives are in position, and there's no red LED on the remote control, the system may be defective.
G
Gloria MurphySep 5, 2025
How to check temperature of the drives of AL-KO AMS2 Automobile Accessories?
- L
  Lance ValenciaSep 5, 2025
  To check if the temperature of the drives in your AL-KO Automobile Accessories is too high, refer to the LED on the remote control. Allow the drives to cool down.
C
Cassandra HansonSep 7, 2025
What to do if AL-KO Automobile Accessories drive retraction does not function?
- J
  Jason OwensSep 7, 2025
  If the drive retraction on your AL-KO automobile accessories is not functioning, try the following: Press and hold the retract key while holding the remote control on the release switch to retract the drives. Repeat this procedure once if necessary. If this still doesn't work, retract the drives manually.
M
Matthew GarciaSep 9, 2025
How to fix defective remote control of AL-KO AMS2?
- S
  Steven SerranoSep 10, 2025
  To fix a defective remote control for your AL-KO automobile accessories, replace the remote control and repeat the initial start-up procedure.