EasyManua.ls Logo

AL-KO PRO 450 - 9 Storage; 10 Replacement Parts; 11 Technical Data

AL-KO PRO 450
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
464882_b 35
Storage
9 STORAGE
NOTE
For further information: Refer to the lawn
tractor’s operating instructions.
WARNING!
Danger of explosion and
fire
Escaping fuel will create
an explosive petrol/air mix-
ture. Deflagration, explo-
sion and fire can lead to
serious and even fatal inju-
ries if fuel is not handled
properly.
Never store the engine
in front of naked flames
or heat sources.
Never operate the en-
gine in a flammable en-
vironment.
If the lawn tractor is idled for longer than 2 to 3
months, the fuel must be drained off to avoid de-
posits in the fuel system. With a shorter idle peri-
od, the fuel can be protected with a fuel stabiliser.
NOTE
For further information: Ask your cus-
tomer service.
1. Draining fuel from the carburettor:
Move the engine to the open air and let it
cool down.
Place the container for the fuel.
Unscrew and remove the drain plug
(06/1).
Let the fuel drain fully.
Replace the drain plug.
2. Clean the engine (see chapter 7.3 "Clean en-
gine and silencer (08)", page32).
3. Storing the engine:
Store the engine in a well ventilated loca-
tion, and not in the vicinity of naked
flames or sources of heat.
Do not store the engine where electric
motors or power tools are operated.
Store protected from moisture.
10 REPLACEMENT PARTS
Recommended spark plugs: QC12YC or
RC12YC (Campion)
Replacement parts can be obtained from the au-
thorised dealer or our service team.
11 TECHNICAL DATA
Engine type PRO 350 PRO 450
Displacement 352cm
3
452cm
3
Power 6.3kW / 2900min
-1
8.5kW / 2900min
-1
Engine oil fill volume 0.8l 1.2l
Cooling system Air cooling Air cooling
Ignition system Transistor magneto ignition Transistor magneto ignition
Crankshaft rotation clockwise clockwise
Electrode clearance of the spark
plug
0.6mm - 0.8mm 0.6mm - 0.8mm

Table of Contents

Related product manuals