What to do if my AL-KO Lawn Mower displays 'CN119: R-Bumper de- flected CN120: L-Bumper de- flected'?
If your AL-KO Lawn Mower displays 'CN119: R-Bumper deflected CN120: L-Bumper deflected', it indicates that the appliance has moved onto an obstacle and cannot free itself. Remove the obstacle.
What to do if my AL-KO Lawn Mower displays 'CN018: Cal: Colli- sion'?
If your AL-KO Lawn Mower displays 'CN018: Cal: Collision', it means the appliance has bumped into an obstacle. Remove the obstacle.
Why does my AL-KO Lawn Mower show 'CN008: Loop signal weak'?
If your AL-KO Lawn Mower displays 'CN008: Loop signal weak', it is likely because the boundary cable is buried too deep. You should check the LEDs on the base station, check the power source of the base station by disconnecting and reconnecting the transformer, and raise the boundary cable to the prescribed height, attaching it directly on the grass if necessary.
What to do if my AL-KO Lawn Mower displays 'CN017: Cal: signal weak'?
If your AL-KO Lawn Mower displays 'CN017: Cal: signal weak', it means the loop signal is too weak. Place the appliance at the prescribed calibrating position, aligning it precisely at right angles and check the power source of the base station by disconnecting and reconnecting the transformer.
General| Brand | AL-KO |
|---|---|
| Model | Solo Robolinho 4100 |
| Category | Lawn Mower |
| Language | English |
Explains danger, warning, caution, and important signal words for safety.
Lists the components included in the delivery package.
Details the components and features of the automatic lawn mower.
Describes the control panel buttons, functions, and the display interface.
Details the base station components, functionality, and the appliance's battery.
Explains operation and integration with AL-KO inTOUCH and innogy SmartHome.
Defines proper applications and lists uses considered misuse of the appliance.
Discusses essential safety features, protective mechanisms, and sensors.
Provides guidelines for operator, persons, animals, appliance, and electrical safety.
Instructions for unpacking, planning, and preparing the lawn for installation.
Steps for installing the base station and routing the boundary cable.
Methods for using the boundary cable to avoid obstacles, create corridors, and exclude slopes.
How to connect the base station to power and verify installation via LEDs.
Instructions for fully charging the battery before the first use.
Steps for configuring essential settings like language, PIN, date, and time.
Procedure for calibrating the appliance to the boundary cable.
Covers starting manually, cancelling mowing, and mowing secondary areas.
Accessing and configuring general settings like language, cutting height, and button tones.
Setting up mowing programs, rain sensor, Eco mode, and start points.
Covers mowing times, edge mowing, inTOUCH, secondary areas, and displaying information.
Detailed instructions for cleaning the automatic lawn mower and its components.
Guidelines for routine checks, replacing cutting blades, and fuses.
How to properly store the appliance during off-season or long breaks.
Guidelines for storing the base station, whether indoors or outdoors.
Recommendations for storing the boundary cable, especially for winter.
Information on the correct disposal of electrical appliances and batteries.
Details regarding battery disposal regulations and symbols.
Information on obtaining warranty, repairs, or spare parts from AL-KO.
Guides the user through troubleshooting common appliance issues and fault codes.
Lists specific error codes and their corresponding causes and solutions.
Details the terms and conditions of the appliance's warranty.
Statement confirming the product's compliance with EU directives and standards.
To Next Page