ALADIN TEC 2G - Diving with Aladin

English
17
III Diving with Aladin
III UWATEC Aladin TEC 2G
III
1 Terminology / Symbols
The information on the display of Aladin varies depending on the kind of dive and the dive phase.
For information about diving with microbubble (MB) levels see chapter V ->32.
Specific features of "Diving with two gas mixtures", are described in chapter VI
->37.
1.1 General terminology / Display during no-stop phase
37min dive time
Elapsed bottom time
No-stop time
24min
Current depth
26.2m
Decompress
i
on phase
Dive phase during which
surfacing is allowed only
after decompression
stops are completed.
No-stop phase
Dive phase during which surfacing is allowed
without stop.
Time
Depth
Ascent rate
(Only while
ascending)
%
Current depth
In metres (feet)
Max depth
Max depth
reached during
the dive
No-stop time
Remaining time
at a given depth
during which ascent
is allowed without
decompression
stop (min).
Nitrogen loading
bar
Oxygen toxicity
CNS O2%
Dive time
Duration of
the dive (min)
CNS O
2
%
DEPTH
NO STOP
DIVE TIM E
Max depth
Total ascent time to surface (7min)
6m
35.7m
Decompression range No-stop range
3m
Time
Depth
Decompression
stop depth
Deepest stage is
displayed.
Decompression stop
duration
Prescribed duration of the
decompression stop at the
displayed decompression
stage (minutes).
Total ascent time
Including decompression
stops in minutes.
Decompression stop
All required decompression
stops must be observed.
Deepest
decompression
stop depth
2min
Decompression
stop duration
STOP
NO
DECO
CNS O
2
%
DEPTH
DIVE TIM E
1.2 Display during decompression phase
(Max depth >) Temperature
> Temperature , O
2
mix and time of day
> (Max depth)…