ALADIN TEC 2G - System and Operation; Push Button Operation

English
9
II UWATEC Aladin TEC 2G
II System and operation
1 System description
Aladin displays all important dive and decompression data and has a memory which stores the full dive
data. The data can be transmitted with an infrared interface (IrDA) and SmartTRAK software to a Windows
®
personal computer.
SmartTRAK software CD is included with the Aladin package. Infrared interfaces are available in PC stores;
a list of recommended interfaces is available on our website (www.scubapro-uwatec.com).
2 Operation
On page 5 and 14 you will find an operating schematic.
2.1 Push buttons
Aladin can be operated with two push buttons ( ). Operation of the push but-
tons is divided into "press" ( / ) and "press and hold (1 second)" ( / ).
At the surface:
/ • Switch on Aladin (time of day display)
• Comparable to the ENTER or RETURN key of a keyboard
• Enter into the displayed sub menu
• Open the displayed setting
• Confirm or enter the displayed value or setting
/ • Scroll through a menu
/ • Once entered with into a sub menu or setting:
• Increase ( ) or decrease ( ) the indicated value
• Change the setting
• Operate the backlight
• Exit the current function or menu and switch to the time of
day display
• Switch off Aladin
Under water:
• Access alternate displays
• Set bookmark
• Operate the backlight
• Activate the safety stop timer (dive mode only, in depths < 6.5m
/ 20ft)
Gauge mode (stopwatch):
• Restart
Diving with two mixtures:
• Initiate switch to gas D or gas 1
• Interrupt switching process
• Confirm switch to gas D or gas 1
Infrared port
Push Buttons
Water Contacts
II
SmartTRAK
Aladin TEC 2G
Infrared Interface
(option)