What to do if appears on ALADIN Diving Instrument?
If the ALADIN Diving Instrument displays '' instead of the diving depth, it's likely due to many repetitive dives, ascents that were too fast, yoyo-diving, or ignored decompression stops, leading to a high number of microbubbles. To resolve this, plan longer surface intervals and aim for lower-risk dives.
Why are desaturation and no fly times so long on my ALADIN Diving Instrument?
If desaturation time and/or no-fly time are excessively long on your ALADIN Diving Instrument, it could be due to slow tissue and/or little workload at the surface. Alternatively, it might be caused by many repetitive dives, yoyo-diving, or disregarding decompression stops, leading to a large number of microbubbles. Plan sufficiently long surface intervals and dives at lower risk.
How to fix the altitude section on ALADIN PRO Diving Instrument?
If the altitude section on your ALADIN Diving Instrument doesn't match your current altitude, it could be due to an unusually high or low atmospheric pressure; in this case, check meteorological information. Alternatively, the air pressure measured by the computer may be incorrect. If the altitude section is wrong by more than one section, send the dive computer in for servicing.
General| Brand | ALADIN |
|---|---|
| Model | PRO |
| Category | Diving Instrument |
| Language | English |
Explains the advanced decompression model, its description, and key advantages.
Emphasizes diver responsibility, essential safety rules, and caution when using the Aladin® Pro.
Covers basic operations, including switching modes, using contacts, and understanding operating modes.
Covers warnings for dive situations, critical alarms, and battery level indicators.
Guides pre-dive checks and details essential functions like dive time, depth, ascent rate, and decompression.
To Next Page
