III Diving with Aladin
®
Pro
31
III
4 Functions during the Dive
4.1 Dive time
The whole time spent below a depth of 1.2 metres is displayed as dive time in minutes. While the dive time is
running, the colon on the right of the figures is flashing at 1 second intervals. Maximum dive time displayed is
199 minutes.
If a dive lasts longer than 199 minutes,
the dive time display starts again at 0
minutes, because the display cannot
show a larger figure.
4.2 Current depth
Current depth is given in 10 cm increments. On switching on and at a diving depth of less than 0.5 m the void
display <—> appears.
Depth measurement is based on fresh-
water. Therefore, Aladin
®
Pro shows a
slightly greater depth than actually true
when diving in salt water, depending on
the salinity of the water.
NO STOP
depth dive time
max. depth deco info
depth dive time
max. depth deco info
NO STOP
depth dive time
max. depth deco info
To Next Page
Loading...
