III Diving with Aladin
®
Pro
35
III
4 Functions during the Dive
4.5 Decompression information
No-stop time is displayed, if no decompression stops are necessary yet. The arrow (no stop) is visible. The
figures indicate no-stop time in minutes.
– No-stop display <99:> means remaining time of 99 minutes or
more.
– No-stop time is calculated assuming normal workload and current
water temperature.
Messages: There is an acoustic alarm, if no-stop time is less than 1 minute. In
this last minute, the no-stop display shows the flashing value <0>.
Action: In order to prevent a decompression dive, you have to ascend a
few metres after this message.
NO STOP
depth dive time
max. depth deco info
NO STOP
depth dive time
max. depth deco info
To Next Page
Loading...
