III Diving with Aladin
®
Pro
36
Decompression values On entering the decompression phase, the arrow
NO STOP
extinguishes. The
arrow
DECOSTOP
appears. Right beside the arrow, the lowest decompression
stage in metres is displayed. Beside the decompression depth, the decompression
time of the displayed stage in minutes appears. The display <9m 3:> means that
a decompression stop of 3 minutes at a depth of 9 m has to be made.
When a decompression stop has been finished, the next higher is displayed. When
all decompression stops have been made, the arrow
DECOSTOP
extinguishes and
the arrow
NO STOP
reappears. The indication of time on the lower right shows
the no-stop time again.
Messages: The decompression alarm is activated if the decompression stop is ignored. Arrow
DECOSTOP
flashes and an acoustic alarm is initiated. Due to the formation of
microbubbles decompression can increase massively while a decompression stop
is ignored. If the surface is reached during the decompression alarm, the arrow
DECOSTOP
continues flashing, in order to point to the risk of a decompression
accident. The SOS-mode is activated 3 minutes after the dive.
If the total (cumulative) duration of the decompression alarm is longer than a
minute it is entered in the logbook.
Action: Descend to the prescribed decompression depth at once!
m
depth dive time
max. depth deco info
DECOSTOP
m
depth dive time
max. depth deco info
DECOSTOP
4 Functions during the Dive
To Next Page
Loading...
