English
Stopwatch
In gauge mode, after immersion, Aladin will automatically monitor the dive
time and at the same time activate the stopwatch. The stopwatch will run for
a maximum of 24 hours.
Resets time and starts stopwatch from zero.
Each start (restart) of the stopwatch creates a bookmark.
After diving in gauge mode
Aladin shows the remaining time span during which it cannot be used in com-
puter mode. Once the waiting period is over, the gauge mode can be switched
off manually ->30.
The no-fly time after diving in gauge mode is 48 hours.
Desaturation time will not be displayed.
31
IV Gauge mode
IV UWATEC Aladin TEC 2G
IV