16 Main Features
If you desire no tone, press key when “CTCSS 00” appears
on display.
To insert a DCS tone:
1. Press
button (“DCS” will blink on the display)
2. Select the desired DCS tone using
/ keys.
If you desire no tone, press
key when “DCS 00” appears
on display.
Channel Recall
To recall the stored channel follow these instructions:
1. Press button until a number (from 1 to 9) blinks in
the bottom right side of the display
2. Use the
/ keys to run the stored channels
3. If a memory is empty, the memory channel blinks; if a
channel has been stored, the number remain fixed.
4. Press
key to end the operations.
When turning on /off the radio, the stored channels remain
memorised in your ALAN 456.
Power save
This function allows an automatically save of the power. If you
receive no signals for 5 secs. max the “Power save“ function
is activated reducing at minimum the consumption
extending the battery life.
Battery level
The battery level indicator is visualised on the display. The
number of segments indicates the battery level.
When
icon blinks, replace the alkaline batteries or
recharge Ni-Cd batteries.
Reset
If ALAN 456 presents some malfunctionings or you want to
cancel all the setting, you can make a reset by pressing
button for 3 secs during the switching on of the radio.
English
To Next Page
Loading...
