Required Items for Installation:
l
ADC-V720W camera and power adapter (included)
l
Broadband (Cable, DSL, or Fiber Optic) Internet
connection with router
l
Personal computer or web enable tablet
l
Login/password for the customer’s Alarm.com account
l
A router with a Wi-Fi protected setup (WPS) button,
or an Ethernet cable
l
If the router does not have a WPS button, and the camera will be
connected to a wireless network, you will need the case-sensitive
SSID (wireless network name) and the network WEP or WPA key (if
encryption is enabled at the router)
Install the Camera(s):
1. Connect the camera’s AC adapter and plug it into a
non-switched outlet.
2. Press and hold the camera’s WPS button for 3
seconds and then press the corresponding WPS button on
the router. Note: If the router does not have a WPS button or if
you have trouble connecting- use a standard Ethernet cable to
connect the camera to the network router.*
3. From a computer on the same network as the camera, log
into the customer’s account at www.alarm.com/login.
4. Type www.alarm.com/addcamera into the web browsers
address bar and follow the on-screen instructions to add the
camera to the Alarm.com account.
Alarm.com, Inc. © 2000 - 2012 All rights reserved. www.alarm.com
*You can congure the camera’s wireless settings when setup is complete. Click on the “Congure wireless network settings for this camera” link and follow the on-screen instructions.
InstallatIon GuIde
Outdoor Wireless Night Vision Camera (ADC-V720W)
Questions? Contact Alarm.com Dealer Support at
1.866.834.0470 or Support@alarm.com.
EZ.INSTALL™
Need help?
General
