Need help?Do you have a question about the Alarm.Com ADC-VDB101 and is the answer not in the manual?
General| Brand | Alarm.Com |
|---|---|
| Model | ADC-VDB101 |
| Category | Security Camera |
| Language | English |
Lists doorbell cameras fully compatible with Alarm.com.
Notes Slim Line II incompatibility with other platforms like SkyBell.
Addresses compatibility of certain SkyBell HD cameras with Alarm.com.
States SkyBell V1 and V2 cameras are not compatible with Alarm.com.
Details required power voltage, VA, and compatible chime types.
Specifies required upload speed and compatible Wi-Fi standards.
Covers mounting plate attachment and mobile app requirements.
Verifies the existing wired doorbell is functional before proceeding with installation.
Guides on visually inspecting doorbell button wiring for proper connection.
Instructs on identifying chime types: mechanical, digital, tube, or intercom.
Information on the SkyBell Digital Doorbell Adapter availability and use.
Emphasizes checking the Wi-Fi password before installation.
Steps to test internet upload speed, requiring at least 2 Mbps.
Steps for sliding the doorbell camera onto the bracket and securing it.
Guides on connecting the SkyBell Digital Doorbell Adapter to a digital chime.
Specifies that Alarm.com Doorbell Camera hardware must be used.
Instructions on safely removing the existing doorbell button.
Steps to affix the doorbell mounting bracket to the wall.
Guide to connecting power wires to the mounting bracket terminals.
Indicates the doorbell camera is ready to sync when the LED is alternating Red and Green.
Steps to navigate and add a new doorbell camera via the Alarm.com app.
Guidance to follow the on-screen prompts in the app for setup.
Instructions to connect the mobile device to the camera's temporary Wi-Fi network.
How to enter the home's Wi-Fi password for configuration.
Enabling notifications and setting up recording schedules for the camera.
Instructions to enable the SkyBell Digital Doorbell Adapter within the app.
Details on receiving immediate alerts for activity detected by the doorbell camera.
Highlights the value of push notifications for instant visitor interaction.
Controls the times and events during which the doorbell camera records clips.
Explains LED indicators for battery charging and the process duration.
Describes LED behavior for Wi-Fi connectivity and AP mode entry.
Instructions to manually place the doorbell camera into AP Mode.
Procedure to restart the doorbell camera by holding the main button.
Steps to perform a factory reset, noting it requires re-syncing.
Details on the required wired power supply and standard doorbell power.
Explains the role of the internal battery during chime activation.
Information on battery charging status and typical charge duration.
Troubleshooting common power supply issues and transformer degradation.
Diagram and notes for configuration without a chime, requiring a resistor.
Wiring diagram for a mechanical chime before doorbell camera installation.
Wiring diagram for a mechanical chime with the doorbell camera installed.
Wiring diagram for a digital chime before installing the doorbell camera.
To Next Page
