Drill
1. Use a 1/4” drill bit to create appropriately sized holes for the supplied anchors at your marked locations.
2. Insert the anchors.
Screw
1. Place the mount over the two anchors.
2. Use the supplied screws to secure the mount in place.
Attach the Wireless Video Doorbell to the Mount
1. Align the prongs on the back of the Wireless Video Doorbell (VDB780B) with the 4 rectangular slots in the mount.
2. Push the VDB780B into the slots and slide down, until the device clicks into place.
3. Slide the latch on the bottom of the mount to secure the VDB780B in place.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Wireless_Video_Doorbell_(A…
Updated: Wed, 08 Mar 2023 14:28:25 GMT
12
To Next Page
Loading...
