Confirm Battery Charge
1. If the battery was not fully charged as part of the Power on the Wireless Video Doorbell section, please remove the
VDB780B and follow the instructions in the Charging the Battery section.
Charging The Battery
Charging Requirements
• A 5V/1.5A USB wall charger
• The supplied charging cable
Charging Steps
Note: A fully depleted battery takes approximately 7 hours to charge.
1. Unlatch the bottom of the mount.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Wireless_Video_Doorbell_(A…
Updated: Wed, 08 Mar 2023 14:28:25 GMT
13
To Next Page
Loading...
Need help?
General
