Need help?Do you have a question about the Alarm Lock DL2800 and is the answer not in the manual?
Details about the audit trail log, its capacity, and how to view it.
Describes user code types, lockout modes, and groups supported by the lock system.
Explains programming for scheduled unlock/lock events and quick schedules.
Covers programming methods via keypad or PC software.
Describes the optional infrared printer for reports.
Details the data transfer module for program data and audit trails.
Allows enabling/disabling users and passage mode for specific times.
Explains managing users linked to multiple groups.
Describes the one-time-use service code and its re-enabling.
Configures lockout attempts and duration before keypad lockout.
Confirms programming is stored persistently.
Mentions built-in error checking for programming.
Covers clock accuracy and adjustment features.
How a Group 1 member can enable passage mode within a time window.
How a Group 1 member enables Group 4 users within a time window.
Instructions for replacing the lock's batteries.
Diagram and explanation of the lock's wire connections.
Steps to power up the lock while keeping programming intact.
Steps to power up and reset the lock to factory defaults.
Explains LED and beep codes for system status and errors.
Basic lock operation principles and latch engagement.
Important notes and recommendations before programming.
Explains the meaning of different LED color and pattern indications.
Lists sounds and their meanings for user feedback.
Details on programming authority levels and user hierarchies.
Step-by-step guide for installing batteries.
Instructions on how to access the programming mode.
Procedures for setting the date, time, and day of the week.
Guides on adding basic user codes and potential code conflicts.
How to safely exit the programming mode.
Command to print clock settings.
Command to print the list of programmed user codes.
Command to print the audit log.
Overview of programming via the keypad interface.
Details on entering the programming mode.
Description of the program mode indicators and timeout.
Methods for exiting the programming mode.
How to program using PC software.
Using the data transfer module with PC software.
Steps to set or change the master code.
How to manage user codes, including types and associations.
Functions to enable or disable specific user codes.
Function to disable a user code.
Function to enable a user code.
Enables users for a specified duration.
Manages lockout for all users except the master.
Activates total lockout for all users.
Deactivates total user lockout.
Modifies user's ability to access programming functions.
Re-enables the service code for use.
Deletes all user codes except the master code.
Resets all schedules and timeout functions.
Resets only timeout functions.
Overview of functions to enable/disable user groups.
Disables Group 1.
Disables Group 2.
Disables Group 3.
Disables Group 4.
Disables all user groups.
Enables Group 1.
Enables Group 2.
Enables Group 3.
Enables Group 4.
Enables all user groups.
Manages group status for a specified duration.
Temporarily disables Group 1.
Temporarily disables Group 2.
Temporarily disables Group 3.
Temporarily disables Group 4.
Temporarily disables all groups.
Temporarily enables Group 1.
Temporarily enables Group 2.
Temporarily enables Group 3.
Temporarily enables Group 4.
Temporarily enables all groups.
Links or unlinks users to specific groups.
Configures the lock's current date.
Configures the lock's current time.
Sets the current day of the week.
Manages daylight saving time adjustments.
Activates daylight saving time.
Deactivates daylight saving time.
Adjusts clock speed for accuracy.
Sets the clock to run faster.
Sets the clock to run slower.
Manages passage mode and its interaction with schedules.
Activates passage mode.
Deactivates passage mode.
Enables passage mode for a set duration.
Manages passage mode where schedules do not override it.
Activates passage mode, not overridden by schedules.
Deactivates passage mode.
Restores lock to scheduled passage mode operation.
Sets how long the lock remains unlocked after code entry.
Sets unlock duration to 5 seconds.
Sets unlock duration to 10 seconds.
Sets unlock duration to 15 seconds.
Prints the lock's audit trail log.
Prints the list of programmed user codes.
Prints current clock settings and software version.
Manages data transfer between lock and PC.
Assigns a number to the lock for AL-DTM use.
Configures lockout after failed entry attempts.
Sets duration of keypad lockout.
Manages the remote input function for door release.
Disables the remote input feature.
Enables the remote input feature.
Allows programming codes matching first digits of other codes.
Activates the enter key function.
Deactivates the enter key function.
Enables/disables passage mode based on schedule.
Schedules passage mode to be enabled (unlock).
Schedules passage mode to be disabled (lock).
Manages group enablement/disablement based on schedule.
Schedules Group 1 to be enabled.
Schedules Group 2 to be enabled.
Schedules Group 3 to be enabled.
Schedules Group 4 to be enabled.
Schedules all groups to be enabled.
Schedules Group 1 to be disabled.
Schedules Group 2 to be disabled.
Schedules Group 3 to be disabled.
Schedules Group 4 to be disabled.
Schedules all groups to be disabled.
Enables groups for predefined quick schedules.
Enables a group for business hours.
Enables a group for daytime hours.
Enables a group for evening hours.
Enables a group for nighttime hours.
Passage mode activated by Group 1 user code within a window.
Sets the start time for Group 1 passage mode activation.
Sets the end time for Group 1 passage mode activation.
Enables Group 4 based on a Group 1 user code within a window.
Sets the start time for Group 4 activation by Group 1.
Sets the end time for Group 4 activation by Group 1.
Resets all programming and the audit log.
Examples of adding users to multiple groups.
Explains how Group 1 activation affects other features.
Example of adding a user to Group 1.
Example of scheduling passage mode activated by Group 1.
Command to manually lock the door.
Command to schedule automatic locking.
General| Brand | Alarm Lock |
|---|---|
| Model | DL2800 |
| Category | Remote Starter |
| Language | English |
To Next Page
