• Signal information - The data rate at which the signal is being transmitted.
• Time and date - supplied by the broadcaster.
1. Repeatedly press and release the Menu/Info button to cycle through the different
information options.
Dynamic range control (DRC)
In DAB mode:
The dynamic range for each radio programme is set by the broadcaster for each radio
station and may be different for the types of programme broadcast, such as pop or
classical music or a chat show. The dynamic range control signal is transmitted in parallel
with the audio signal for each programme and with your radio you can use this control
signal to expand or compress the dynamic range (the difference between the loudest and
quietest sounds) of the reproduced audio signal. Changing the dynamic range can affect
the ‘loudness’ and/or ‘quality of sound’ of the programme that you hear so that it will be
more suited to your listening conditions and your own personal listening requirements.
e.g. in a noisy environment, where quiet sounds might be swamped, setting the
compression to maximum will ‘boost’ the quiet sounds, whilst keeping the loudest sounds
at their original level.
There are 3 levels of compression:
• DRC off - no compression. This is the default setting.
• DRC low - medium compression.
• DRC high - maximum compression.
1. Press and hold the Menu/Info button to enter the menu options.
2. Press and release the Next button to scroll to <DRC>. Press and release the Select
button. The current DRC setting will have an ‘*’ in the display.
3. Press and release the Next button to scroll through the options and press and release
the Select button to confirm.
To Next Page
Loading...
