EasyManua.ls Logo

Alber twion - Displays During Battery Charging

Alber twion
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
17
5.2 Displays when charging the battery
Displays on the wheel
1 LED flashes – the battery is charged to less than 20%.
One LED flashes, 1 LED lights up – the battery is charged to between 20% and 40%.
One LED flashes, 2 LEDs light up – the battery is charged to between 40% and 60%.
One LED flashes, 3 LEDs light up – the battery is charged to between 60% and 80%.
One LED flashes, 4 LEDs light up – the battery is charged to between 80% and 100%.
5 LEDs light up – the battery is charged to 100%.
If a fault occurs during the charging process, the fault is indicated by
the LED display and various acoustic signals (see chapter 5.3).
Displays on the battery charger
The status of the battery charger is shown by its LED displays [10] as follows:
LED display Status
Orange, illuminated Charger is ready for use
Green, flashing Charging process is underway
Green, illuminated Charging process is complete
Red, illuminated Fault
!

Table of Contents

Other manuals for Alber twion

Related product manuals