Albrecht Tectalk Worker 3 - Standby Mode; Mode Selection; DAB+ Digital Radio Mode

21
English
19
SOS button
Press SOS button to play a loud siren sound and activate
the emergency light
20 Tripod threat 1/4“ tripod threat to mount the radio
21
Hand crank Twist hand crank to manually recharge the internal battery
22 Solar panel Face the solar panel to the sun to recharge the radio
5. Standby mode
To put the radio into standby mode, long press the On/Off button . To reactivate the
radio, short press the On/Off button . To fully turn off the radio and preserve battery
life, long press the On/Off button again in standby mode. No alarms are available,
when the radio is turned off completely.
In standby mode, press the settings button to quickly view your currently set alarm
settings, or press the OK button to quickly jump to the alarm settings wizard (see “10.1.
Alarm” on page 23).
6. Mode selection
To select the desired audio mode, short press the mode button , while the radio is
turned on. The available audio modes are:
• DAB+ digital radio
• FM analogue radio
• Bluetooth wireless audio
7. DAB+ digital radio mode
Use this mode to listen to digital radio broadcasts. You can cycle through available
stations with the left and right buttons. To access more functions, open the
menu by long pressing the settings button . Navigate the menu with the left
and right buttons, and use the OK EXWWRQ WRFRQ¿UP7R H[LW WKHPHQXXVH WKH
settings button again.