User manual
8AL91434ENABed01 63 /113
• If the option is not enabled (Request Pincode on Boot).
o Access to the administration menu of the desk phone (see chapter below).
o VPN VPN Config
o Enter your PIN code.
o Validate.
o Enable VPN: enable the teleworker.
o Select this icon to save parameters.
o The VPN configuration is saved and the main menu is displayed.
o Select this icon to exit the configuration menu.
o The phone starts as teleworker.
If an error occurs when your phone is running in remote mode, a popup is displayed with an error
message. Please note this message to send to your administrator.
To Next Page
Loading...