User manual
8AL91434ENABed01 83 /113
4.22.7 Legal notice
Display regulatory information about your desk phone.
Use one of the following:
• Legal.
• Select the settings icon displayed at the bottom left of the screen during the boot (after a
few seconds) Legal.
4.22.8 Access to administrator configuration
Your administrator can access to the phone configuration. Depending on the system configuration, an
administrator password is requested to access this menu.
• : open the user local menu.
• Config. MMI
The User Local menu can also be accessed from the system MENU: Reach the 'Menu' page Settings
Phone Local Menu
• This section allows the administrator to set or consult:
o IP parameters: IP Parameters IP Status
o DHCP option: IP Parameters IP Config
o Phone memory: IP Parameters Memories
o Used network (wired or wireless): Network
o Wired network configuration: Network Wired network
o Wireless network configuration: Network Wireless network
o VPN configuration: VPN
o Security: Security
o Software information (version, run mode): Software infos
o Hardware information (MAC, CPU): Hardware infos
o Beacon activation: Hardware infos Bluetooth infos BT Beacon
o Software update mode: Software infos Upgrade
▪ Enable software upgrade: upgrade via network (system).
▪ Upgrade from USB now: use a USB drive to upgrade the software when you
restart the desk phone.
o All logs: Servicing
o Factory configuration: Reset to Defaults
4.22.9 Auto upgrade the desk phone via USB key
The desk phone updates automatically by downloading new binary from the communication server,
however, it is possible to do this using a USB-C key. The key has to be formated in FAT32 mode.
• Create an empty text file on the USB key: upgrade.auto
Please check that the file does not have the.txt extension (especially when the file extension is
hidden in system preferences).
• Create a directory on the USB key: upgrade
• Copy binary files into the new directory (the file names are given as an indication):
▪ bin86x8P
▪ noe86x8P
• Insert the USB key in the corresponding USB-C slot.
• Reboot the phone (the led is blinking during upgrade).
To Next Page
Loading...