Need help?Do you have a question about the Alcatel-Lucent 1830 PSS-36 and is the answer not in the manual?
General| Brand | Alcatel-Lucent |
|---|---|
| Model | 1830 PSS-36 |
| Category | Switch |
| Language | English |
Provides information about managing the detection, isolation, and correction of abnormal operation.
Provides an alphabetical listing of all alarm conditions generated by the 1830 PSS.
Introduces the chapter, outlining its purpose to describe trouble-clearing procedures for 1830 PSS.
Provides general safety statements applicable to all trouble-clearing procedures.
Describes the AISL condition, its severity, applicability, and corrective actions.
Explains CONTCOM alarms related to card failure and communication issues.
Details EQPT conditions indicating card failure leading to a hardware failure declaration.
Covers FPGAFAIL alarms when firmware download or programming fails.
Details LINKDOWN alarms when Ethernet links are out of service.
Covers LOS conditions indicating loss of signal on optical cards.
Explains MAN conditions for manually caused abnormal states like card or port maintenance.
Details MISMATCH conditions including card, power filter, and shelf mismatches.
Details PWR alarms related to power filter breaker or voltage issues.
Covers PWRADJFAIL alarms for power adjustment failures or service state issues.
Details REPLUNITMISS conditions for card missing.
Explains SWEQPT conditions for Equipment Controller redundancy issues.
Covers procedures for viewing and configuring alarms and logs using WebUI and RM-PhM.
Provides procedures for backing up and restoring the system database.
Provides steps for reseating a card, noting potential service impact.
Guides on replacing various system components like cards, SFPs, and equipment controllers.
To Next Page