WEBUI Select Reports > Alarm List > Total.
EQPT
EQPT (Card Failure - Device)
The Card Failure - Device alarm text for the EQPT condition indicates a fault on the card
that has caused the system to declare a hardware failure. This condition may be declared
due to a failure in the SEEP or other unknown hardware failures depending on the card
type the alarm is raised against. This is a critical service affecting alarm for cards carrying
traffic and affects the traffic currently flowing through the failed device.
Trouble-clearing procedures
ETHCSF
ETHCSF (Ethernet Client Signal Failure)
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
2-72
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
E ND OF STEPS
...................................................................................................................................................................................................
To Next Page
Loading...
