Alcatel-Lucent 1830 PSS-36 - Page 543

SLTMSIG
SLTMSIG (Timing reference frequency has moved off the
required accuracy limits (not Protected or Protection not
Available))
The SLTMSIG condition occurs when the OT port detects SLTMSIG at the LINEREF
layer. A LINEREF detects SLTMSIG when the timing reference frequency has moved off
the required accuracy limits, (not Protected or Protection not Available).
Severity Minor
Service affecting? No
Applicability LINEREFSYS
To clear the alarm, check the reference frequency offset.
Trouble-clearing procedures SLTMSIG (Timing reference frequency has moved off the
required accuracy limits (not Protected or Protection not
Available))
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
2-293