Alcatel-Lucent 300 - Selecting Your Telephone System

Registering the telephone
9
60
 If the registration operation runs correctly (Subscription accepted), the telephone is ready
for use, and the radio coverage icon appears.
 If the registration operation has not been successful, the station proposes launching the
subscription again.
 Depending on the type of system concerned, registration may require one or more
additional operations on the system.
Selecting your telephone system
Your telephone can be programmed to function on 5 different DECT systems (Alcatel-Lucent or
GAP).
select the 'system' function
select the desired input (the chosen option is
indicated by the radio button with a central dot)
apply
The selection is retained even after switching the telephone on/off.
The selection of a specific system (SYSTEM...) forces operation on a
specific system. This selection must be changed if one wishes to
change system. Selecting 'Lock to any' enables the telephone to
connect automatically when it enters a system coverage zone. If the
systems programmed in the telephone have common coverage zones,
the telephone selects the first system found.
123
Launch
Subscription?
123
123
SYSTEM 1
SYSTEM 2
Lock to any