Alcatel-Lucent 5620 - Page 35

2 — 1830 PSS alarms
Alcatel-Lucent 5620 Service Aware Manager, Release 9.0 R4 September 2011 2-11
3HE 06513 AAAD TQZZA Edition 01 Optical Alarm Reference
Name: FarEndPortMappingMismatch (2018)
Type: communicationAlarm (96)
Probable cause: FEPortMismatch (1001)
Severity: Critical
Object Type (class): PhysicalPort
Domain: equipment
Implicitly cleared (self-clearing): Yes
The alarm is raised when a far-end
system detects a port mapping
mismatch.
Name: FarEndProtLineFail (2019)
Type: communicationsAlarm (4)
Probable cause: FePrLf (1002)
Severity: Warning
Object Type (class): PhysicalPort
Domain: equipment
Implicitly cleared (self-clearing): Yes
The alarm is raised due to far end
protection line failure.
Name: FarEndRemoteFault (2020)
Type: communicationAlarm (96)
Probable cause: FeLanRfi (1003)
Severity: Info
Object Type (class): PhysicalPort
Domain: equipment
Implicitly cleared (self-clearing): Yes
The alarm is raised when a far-end
system sends an RFI.
Name: FDI (3355)
Type: configurationAlarm (11)
Probable cause: FDI (1188)
Severity: Major
Object Type (class): PhysicalPort
Domain: equipment
Implicitly cleared (self-clearing): Yes
The alarm is raised when an FDI is
detected.
Name: FecEcSignalDegrade (2021)
Type: communicationsAlarm (4)
Probable cause: FecEcSdeg (1004)
Severity: Minor
Object Type (class): PhysicalPort
Domain: equipment
Implicitly cleared (self-clearing): Yes
The alarm is raised on PreFEC Signal
Degrade.
Name: FecUbcSignalDegrade (3358)
Type: configurationAlarm (11)
Probable cause: fecUbcSd (1191)
Severity: Major
Object Type (class): PhysicalPort
Domain: equipment
Implicitly cleared (self-clearing): Yes
The alarm is raised when a post-FEC
signal is degraded.
Name: FirmwarePendingObsolete (2022)
Type: equipmentAlarm (3)
Probable cause: FwPendingObsolete (1005)
Severity: Info
Object Type (class): CardSlot
Domain: equipment
Implicitly cleared (self-clearing): Yes
The alarm is raised due to
provisioned firmware will be
obsolete after sw upgrade.
Name: FirmwareUpgradePending (2023)
Type: equipmentAlarm (3)
Probable cause: FwUpgradePending (1006)
Severity: Info
Object Type (class): CardSlot
Domain: equipment
Implicitly cleared (self-clearing): Yes
The alarm is raised due to pending
upgarde firmware.
Name: FirmwareVersionNotDefault (2024)
Type: equipmentAlarm (3)
Probable cause: FwVersionNotDefault
(1007)
Severity: Info
Object Type (class): CardSlot
Domain: equipment
Implicitly cleared (self-clearing): Yes
The alarm is raised due to incorrect
version of firmware.
Name: ForcedSwitchingToProtection (2025)
Type: communicationsAlarm (4)
Probable cause: FrcdWKSWPR (1008)
Severity: Info
Object Type (class): PhysicalPort
Domain: equipment
Implicitly cleared (self-clearing): Yes
The alarm is raised when forced
switching takes place to Protection.
Name: ForcedSwitchingToWorking (2026)
Type: communicationsAlarm (4)
Probable cause: FrcdWKSwbk (1009)
Severity: Info
Object Type (class): PhysicalPort
Domain: equipment
Implicitly cleared (self-clearing): Yes
The alarm is raised when a forced
switch to the working APS channel
occurs.
Alarm Attributes Description
(10 of 37)