Alcatel-Lucent 7210 SAS - Getting Started; Alcatel-Lucent 7210 SAS-Series Router Configuration Process; Table 1: Configuration Process

7210 SAS D, E OS Router Configuration Guide Page 13
Getting Started
In This Chapter
This chapter provides process flow information to configure routing entities, virtual routers, IP and
MAC filters.
Alcatel-Lucent 7210 SAS-Series Router Configuration Pro-
cess
Table 1 lists the tasks necessary to configure logical IP routing interfaces, virtual routers, IP and
MAC-based filtering.
This guide is presented in an overall logical configuration flow. Each section describes a software
area and provides CLI syntax and command usage to configure parameters for a functional area.
Table 1: Configuration Process
Area Task Chapter
Router configuration Configure router parameters,
including router interfaces and
addresses and router IDs.
IP Router Configuration on page 15
IP and MAC filters Filter Policies on page 59
Reference List of IEEE, IETF, and other
proprietary entities.
Standards and Protocol Support on page 825