Alcatel-Lucent 7210 SAS - Apply Filter Policies to an IES Interface

Common Configuration Tasks
Page 84 7210 SAS D, E OS Router Configuration Guide
Apply Filter Policies to an IES Interface
IP filter policies can be applied to an IP interface created in an IES service. These filter policies
apply to the routed management traffic.
CLI Syntax: config>service>ies# interface ip-int-name
address ip-address
sap sap-id
ingress
filter ip ip-filter-id
The following displays an IP filter applied to an IES sap at ingress.
A:ALA-48>config>service>ies# info
----------------------------------------------
interface "to-104" create
address 10.1.2.1/24
sap lag-2:0.* create
ingress
filter ip 10
exit
exit
...
----------------------------------------------
A:ALA-48>config>service>ies#