Alcatel-Lucent 7210 SAS - Deleting a Logical IP Interface

IP Router Configuration
7210 SAS D, E OS Router Configuration Guide Page 25
Deleting a Logical IP Interface
The no form of the interface command typically removes the entry, but all entity associations
must be shut down and/or deleted before an interface can be deleted.
1. Before loopback IP interface can be deleted, it must first be administratively disabled with
the
shutdown command.
2. After the interface has been shut down, it can then be deleted with the no interface
command.
CLI Syntax: config>router
no interface
ip-int-name
Example
: config>router# interface test-interface
config>router>if# shutdown
config>router>if# exit
config>router# no interface test-interface
config>router#