To Next PageTo Next Page
Need help?Do you have a question about the Alcatel-Lucent 7705 SAR-A and is the answer not in the manual?
General| Brand | Alcatel-Lucent |
|---|---|
| Model | 7705 SAR-A |
| Category | Network Router |
| Language | English |
Provides an overview of the SAR-A chassis, site prep, installation, connection, and provisioning.
Defines mandatory regulations terms used in the guide for clarity and reference.
Outlines mandatory regulations for installation and operation, including safety and ESD precautions.
Details mandatory regulations for installation and operation within Canada.
Details mandatory regulations for installation and operation within the United States.
Details mandatory regulations for installation and operation within the European Union.
Details mandatory regulations for installation and operation in Australia and New Zealand.
Details conformance statements and requirements for deployment in China.
Describes the SAR-A chassis's purpose, design, and its two hardware variants.
Details the chassis, control/switching, various ports, and power supply inputs.
Provides the ordered steps for installing the 7705 SAR-A chassis.
Important safety warnings and notes related to site preparation and installation.
Lists physical dimensions, weight, and mounting options for the 7705 SAR-A chassis.
Details operating temperature, humidity, altitude, and shock/vibration limits for the chassis.
Specifies suitable and restricted locations for installing the 7705 SAR-A chassis.
Discusses site characteristics affecting equipment reliability, including geographical factors.
Instructions and precautions for safely removing the 7705 SAR-A chassis from its packaging.
Guides on physically mounting the 7705 SAR-A chassis into a standard 19-inch rack.
Provides instructions for preparing and making the chassis earth ground connection.
Details on wiring and connecting the DC power source to the 7705 SAR-A.
Specifications for the 100W HVPS, including physical, environmental, and storage.
Instructions for wiring the HVPS to the 7705 SAR-A for AC or DC power.
Step-by-step guide for installing and removing Small Form-factor Pluggable modules.
General information on connecting copper and fiber-optic cables to the SAR-A.
Instructions for making shield ground connections to maintain EMC compliance.
Details on connecting external synchronization sources to the Sync In port.
Steps for powering on the router and initial system checks.
Methods for accessing the router's management interface: Console, SSH, Telnet.
Information on factory-provisioned settings and port identifiers for the SAR-A.
Describes the connectors and LEDs on the front panel of the 7705 SAR-A.
Identifies the port connectors accessible on the 7705 SAR-A.
Specifies the pinout assignments for the Management port (RJ-45).
Specifies the pinout assignments for the Console port (RJ-45).
Details pinout assignments for Gigabit and Fast Ethernet RJ-45 ports.
Specifies the pinout assignments for the T1/E1 ports (RJ-45).
Lists compliance with various EMC industrial standards for different SAR models.
Lists compliance with EMC regulatory and customer standards for different SAR models.
Lists compliance with various environmental standards for different SAR models.
Lists compliance with various safety standards for different SAR models.
Lists compliance with telecom interface standards for different SAR models.
Lists supported protocols and related RFCs used by the 7705 SAR.
