Alcatel-Lucent 7705 SAR-A - Figure 14 Preparing the Ground Wire; Figure 15 Attaching the Chassis Ground Connector (Cable Routed Down); Table 15 Ground Wire Descriptions

Installing and Grounding the Chassis
7705 SAR-A Chassis Installation Guide 73
Figure 14: Preparing the Ground Wire
Figure 15 and Figure 16 show the chassis ground connector when the cable is routed down
and when it is routed up. Table 16 describes the chassis ground connection components.
Figure 15: Attaching the Chassis Ground Connector (Cable Routed Down)
Table 15: Ground Wire Descriptions
Key Description
1 Copper ground wire with green, or green/yellow shield (minimum #18 AWG)
2 Insulation stripped according to local safety code
3 Ring lug
3
2
1
19641
23324
Mgmt
ToD Out
Lnk
Act
Sync
In
+Batt A
-Batt A
+Batt B
-Batt B
Console
-48 VDC
1
2
3
4 56 3