Alcatel-Lucent 7705 SAR-A - Storage; 100 W High Voltage Power Supply Power Consumption; Power and Cabling Requirements; Table 21 100 W High Voltage Power Supply Storage Specifications

100W High Voltage Power Supply System Specifications
86 7705 SAR-A Chassis Installation Guide
Storage
To store an uninstalled 100W High Voltage Power Supply, repackage it in its original
packaging or an appropriately sized container and keep it in a dry, dust-free, temperature-
controlled environment.
100W High Voltage Power Supply Power Consumption
Table 22 lists the power consumption for the 100W High Voltage Power Supply.
Note:
1. The 100W High Voltage Power Supply can provide a maximum output power of 115 W.
Power and Cabling Requirements
Table 21: 100W High Voltage Power Supply Storage Specifications
Parameter Description
Storage and shipping temperature From –40° to 158°F (–40° to 70°C)
Non-condensing relative humidity Within 5 to 95%
Table 22: 100W High Voltage Power Supply Power Consumption
Description Rated Output Power Typical Power
Efficiency (%)
100W High Voltage Power Supply
100 W
1
90%
Danger:
• Power cable(s) must meet local electrical code requirements.
• All power to the equipment rack or cabinet should be disconnected before the
installation.
• For DC power supplies, an external 20 A (maximum) DC-rated circuit breaker or fuse
must be located conveniently close to the equipment. This is intended as the disconnect
device.
• When removing DC power cables from the system, first disconnect the power from the
source and then disconnect the cables from the 100W High Voltage Power Supply.