Alcatel-Lucent 7705 SAR-A - Environmental Standards Compliance

Standards and Protocol Support
7705 SAR-A Chassis Installation Guide 137
3. Class B
Table 38: Environmental Standards Compliance
Standard Title Platform
SAR-X SAR-A SAR-M SAR-8 SAR-18 SAR-H SAR-Hc SAR-W SAR-Wx
IEEE 1613:2009 +
A1:2011
Environmental and Testing Requirements for
Communications Networking Devices
✓
1
✓
1
✓
1
✓✓
IEC 61850-3 Communication networks and systems for
power utility automation - Part 3: General
requirements
✓
2
✓
2
✓
2
✓
2
✓
2
IEC 60068-2-1 Environmental testing – Part 2-1: Tests –
Test A: Cold
✓✓✓✓✓✓✓✓✓
IEC 60068-2-2 Environmental testing - Part 2-2: Tests - Test
B: Dry heat
✓✓✓✓✓✓✓✓✓
IEC 60068-2-30 Environmental testing - Part 2: Tests. Test
Db and guidance: Damp heat, cyclic (12 +
12-hour cycle)
✓✓✓✓✓✓✓✓✓
IEC 60255-21-2 Electrical relays - Part 21: Vibration, shock,
bump and seismic tests on measuring relays
and protection equipment - Section Two:
Shock and bump tests
✓ ✓✓✓✓
ETSI 300 753 Class 3.2 Acoustic noise emitted by
telecommunications equipment
✓✓✓✓✓✓✓✓✓
Telcordia GR-63-CORE NEBS Requirements: Physical Protection ✓✓✓✓✓✓✓✓✓
ETSI EN 300 019-2-1
v2.1.2, Class 1.2
Specification of environmental tests; Storage ✓✓✓✓✓✓✓✓✓
ETSI EN 300 019-2-2
V2.1.2, class 2.3
Specification of environmental tests;
Transportation
✓✓✓✓✓✓✓✓✓
ETSI EN 300 019-2-3
V2.2.2, class 3.2
Specification of environmental tests;
Stationary use at weatherprotected locations
✓✓✓✓✓✓✓
ETSI EN 300 019-2-4
v2.2.2 class T4.1
Specification of environmental tests;
Stationary use at non-weatherprotected
locations
✓✓
Telcordia GR-3108-
CORE
Generic Requirements for Network
Equipment in the Outside Plant (OSP)
✓
3
✓
3
✓
3
✓
3
✓
3
✓
3
✓
4
✓
4