Unpacking the Chassis
68 7705 SAR-A Chassis Installation Guide
Unpacking the Chassis
The 7705 SAR-A chassis has no field-replaceable parts. The chassis is the only piece of
hardware packed in its shipping container.
Unpacking Precautions
Review the following list to avoid injury and to prevent damage to the 7705 SAR-A.
• The shipping weight of the chassis is approximately 9.5 lbs (4.3 kg).
• The chassis is shipped in a heavy corrugated cardboard container and is encased in a
foam tray. It is acceptable to discard the packaging container in accordance with local
practices for disposal and recycling.
• Keep the chassis wrapped in the anti-static packaging until you are ready to install it.
Figure 12 displays the components of a packed 7705 SAR-A chassis. Table 13 lists the
7705 SAR-A packing components.
Note: If the 7705 SAR-A is to be relocated at a later time, observe the warnings that are
described in Site Preparation that pertain to relocating the chassis.
Note: It may be desirable to save a small quantity of undamaged original packaging
containers and materials for reuse. For example, the packaging container could be reused
for shipment of a 7705 SAR-A to a Repair Center or for future relocation.
To Next Page
Loading...
