Standards and Protocol Support
134 7705 SAR-A Chassis Installation Guide
Notes:
1. Performance Class 1
2. Performance Class 1 (Class 2 w/ Optics interfaces only)
Table 36: EMC Industrial Standards Compliance
Standard Title Platform
SAR-X
SAR-A
SAR-M
SAR-8
SAR-18
SAR-H
SAR-Hc
SAR-W
SAR-Wx
IEEE 1613:2009 +
A1:2011
IEEE Standard Environmental and Testing
Requirements for Communications
Networking Devices Installed in Electric
Power Substations
✓
1
✓
2
✓
1
✓
4
✓
4
IEEE 1613.1-2013 IEEE Standard Environmental and Testing
Requirements for Communications
Networking Devices Installed in
Transmission and Distribution Facilities
✓
5
✓
6
✓
3
✓
7
✓
7
IEEE Std C37.90 IEEE Standard for relays and relay systems
associated with Electric Power Apparatus
✓ ✓✓✓✓
IEEE Std C37.90.1 Surge Withstand Capability (SWC) Tests ✓ ✓✓✓✓
IEEE Std C37.90.2 Withstand Capability of Relay Systems to
Radiated Electromagnetic Interference from
Transceivers
✓ ✓✓✓✓
IEEE Std C37.90.3 IEEE Standard Electrostatic Discharge Tests
for Protective Relays
✓ ✓✓✓✓
EN 50121-4: 2006 Electromagnetic Compatibility – Part 4:
Emission and Immunity of the Signalling and
Telecommunications Apparatus
✓✓✓✓✓✓✓✓✓
IEC 62236-4:2008 Electromagnetic Compatibility – Part 4:
Emission and Immunity of the Signalling and
Telecommunications Apparatus
✓✓✓✓✓✓✓✓✓
IEC 61000-6-2:2005 Generic standards – Immunity for industrial
environments
✓✓✓✓✓✓✓✓✓
IEC 61000-6-4:2006 Generic standards – Emissions standard for
industrial environments
✓✓✓✓✓✓✓✓✓
IEC TS 61000-6-5 Immunity for power station and substation
environments
✓ ✓✓✓✓
IEC 61850-3 Communication networks and systems for
power utility automation - Part 3: General
requirements
✓ ✓✓✓✓
IEC/AS 60870.2.1 Telecontrol equipment and systems.
Operating conditions. Power supply and
electromagnetic compatibility
✓ ✓✓✓✓
To Next Page
Loading...
