Need help?Do you have a question about the Alcatel-Lucent OmniSwitch 6860 and is the answer not in the manual?
General| Model | OmniSwitch 6860 |
|---|---|
| Layer | Layer 3 |
| Switching Capacity | Up to 176 Gbps |
| MAC Address Table Size | 32, 000 entries |
| Jumbo Frame Support | Yes |
| Operating Humidity | 10% to 90% non-condensing |
| Ports | 24, 48 |
| Management | Web-based, CLI, SNMP |
| Routing Protocol | OSPF, BGP, RIP |
| VLAN Support | Yes |
| Operating Temperature | 0 to 45°C |
| Product Type | Ethernet Switch |
| Form Factor | Rack-mountable |
Specifies that the guide applies only to OmniSwitch 6860 switches.
Identifies who should read the manual and when it should be consulted.
Outlines what is included, excluded, and how the information is structured.
Lists related guides, CLI reference availability, and a documentation roadmap.
Details how to contact Alcatel-Lucent for technical assistance and support.
Lists various OS6860 models and their basic specifications.
Describes console, USB, RS-232 ports, and the Ethernet Management Port.
Discusses features like power supply redundancy, hot-swapping, and hardware monitoring.
Explains automatic monitoring, LEDs, and user-driven monitoring for hardware status.
Covers items needed, site prep, environmental, and electrical requirements for installation.
Details items included, weight, unpacking, and airflow requirements for the switch.
Refers to mounting details and explains cable connections for console and EMP.
Describes the boot sequence, component LEDs, and the first login session.
Guides through IP setup, password change, and setting system parameters.
Details front/rear panels and specs for OS6860-24, OS6860-48, OS6860E-24, OS6860E-48, OS6860E-U28.
Details front/rear panels and specs for OS6860-P24 and OS6860-P48 models.
Details front/rear panels and specs for OS6860E-P24 and OS6860E-P48 models.
Provides general rack mounting recommendations and detailed airflow requirements.
Explains blank panels and guides on installing rack mount flanges and chassis.
Covers tabletop placement and lists the four power supply types used in OS6860 switches.
Covers specific power supply models, their front panels, specs, LEDs, and DC connections.
Step-by-step guide for installing and removing power supplies from the chassis.
Explains chassis grounding and details the OS6860 FANTRAY NONPOE fan tray.
Guides on viewing slot info, monitoring temperature, and handling error conditions.
Details OS-BPS front/rear panels and lists supported/unsupported configurations.
Lists physical, environmental, and power specifications for the OmniSwitch Backup Power Shelf/System.
Discusses redundant operation, hot-swappability, status LEDs, and connector priority.
Provides general recommendations for mounting the OS-BPS in a rack and airflow needs.
Guides on installing rack mount flanges and securing the OS-BPS chassis in a rack.
Covers AC/PoE power supply details, specs, LEDs, and connection procedures.
Step-by-step guide for installing and removing system and PoE power supplies.
Explains how to properly ground the OS-BPS chassis for safety.
Guides on disconnecting switches from the OS-BPS and removing power supplies.
Explains PoE function, terminology, and its benefits for network devices.
Lists general PoE specifications and how to view power supply status.
Details default settings for PoE operational status, power allocation, and priority.
Explains PoE class detection, operational status, and how to enable/disable PoE.
Guides on setting total power available for ports/slots, and port priority levels.
Explains how priority disconnect manages power during budget constraints and its status.
Shows how to monitor current PoE statistics and settings using CLI commands.
States compliance with EU directives for EMC, LVD, and Telecom Terminal Equipment.
Indicates WEEE compliance and lists hazardous substances per China RoHS.
Lists safety, EMI/EMC, and environmental standards the product complies with.
Provides regulatory statements and warnings for Class A digital devices.
Provides safety warnings in French, German, and Spanish for blank panels, storms, and installation.
Covers laser radiation, operating voltage, power disconnection, earthing, and ESD.
Details requirements for connecting DC power supplies and proper earthing.
Provides additional safety warnings in Spanish regarding chassis lifting, air circulation, and power.
To Next Page
