Need help?Do you have a question about the Alcatel-Lucent OmniSwitch 6860N and is the answer not in the manual?
General| Model | OmniSwitch 6860N |
|---|---|
| Switching Capacity | Up to 176 Gbps |
| Jumbo Frame Support | Yes |
| Type | Network Switch |
| Uplink Ports | 4 x 10G SFP+ ports |
| MAC Address Table Size | 32K |
| Power Supply | AC or DC |
| Dimensions (H x W x D) | 4.4 x 44 x 35 cm (1.73 x 17.32 x 13.78 in) |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| Operating Humidity | 10% to 90% (non-condensing) |
| Management | CLI, SNMP |
| Features | Layer 2/3 switching, IPv4/IPv6, QoS |
| Form Factor | 1U rack-mountable |
| Ports | 24 or 48 x 10/100/1000Base-T ports |
Details the specific OmniSwitch 6860 switch models covered by this guide.
Identifies who should read the manual and when it is most beneficial.
Outlines the information included, excluded, and the guide's structure.
Guidance for getting your switch up and running for the first time.
Learning about basic hardware and software features after initial setup.
Procedures for connecting the switch to a network environment.
Lists all relevant user manuals, guides, and support documentation for OmniSwitch.
Information on accessing 7x24 technical support and service programs.
Details hardware and software safeguards for preventing data flow loss.
Covers required items, site preparation, environmental and electrical requirements.
Instructions for unpacking, included items, and weight considerations.
Recommendations for proper airflow and switch mounting procedures.
Guide to connecting cables, booting the switch, and understanding component LEDs.
Steps for first login, IP settings, unlocking sessions, and saving changes.
Details front/rear panels, specifications for various OmniSwitch 6860 models.
Covers general, airflow, rack, and standalone installation guidelines.
Information on power supply types, dying gasp, connections, installation, and removal.
Details on viewing slot information, monitoring temperature, and understanding chassis LEDs.
Lists PoE standards, supported platforms, power ranges, and budget information.
Covers operational status, defaults, class detection, port/slot power, and priority.
Details Fast PoE, Perpetual PoE, Priority Disconnect, and Guard Band functionality.
Instructions for using CLI commands to monitor PoE status and settings.
Covers CE Mark, WEEE, China RoHS, Taiwan RoHS, and California Proposition 65.
Lists safety, EMI/EMC, and environmental standards the product complies with.
Details warnings for FCC, Canada, JATE, CISPR, Korea, VCCI, Laser, and cables.
Includes safety warnings for blank panels, storms, installation, laser, voltage, and ESD.
To Next Page